900345 J.Thielmann Poland Sales
If you are looking for a reliable supplier where you can purchase the 900345 Pneumatic Motor, you are in the right place. E-SUPTEC PL sells in the Poland marketJ.Thielmann all product groups belonging to the brand, with fast delivery times and competitive prices.
Technical Specification
JT-1536 - For gas nozzle cleaning device BRG - With protective cap - D=36mm - Air supply thread G1/4" - Exhaust thread G3/8" - Silencer G3/8" - Includes silencer G3/8" with dirt ring - From 11-2015 to 11-2017 in BRG-3000 - Used in BRG-10 Xline - Various special devices BRG-2000 XXX - Replaces motor DM-05 900, item no. 900333 Note: Motor is suitable for oil-free use, but slight oiling increases the motor lifespan. For this, use a maintenance unit with suitable pneumatic oil: Maintenance units: - Item no. 890108 alternatively - Item no. 300586 Suitable pneumatic oil: - Item no. 300703
Note 1:
When using a motor 900345, supplied
from January 2025, it must be noted that the new
version is 4mm shorter at the back / bottom when replacing an old
motor.
Note 2:
Motor is suitable for oil-free use.
Slight oiling of the air supply increases the motor
lifespan. Use maintenance unit with suitable
pneumatic oil.
Maintenance units:
- Item no. 890108 alternatively Item no. 300586
Pneumatic oil 2.5 liters:
- Item no. 300703
Note 3:
Removing the motor cap:
The direction of rotation to loosen the motor cap
is counterclockwise when viewed from above
on the motor cap / motor shaft.
To remove the motor cap, place the motor on
a flat surface. Insert a 5mm pin L=40mm or, for example, a
M5x40mm screw into the 5mm transverse hole, and hit
the end of the screw or pin with a rubber hammer. Repeat if necessary.