KD-35763 KFG Level AG Poland Sales
If you are looking for a reliable supplier where you can purchase the KD-35763 industrial product, you are in the right place. E-SUPTEC PL sells in the Poland marketKFG Level AG all product groups belonging to the brand, with fast delivery times and competitive prices.
Technical Specification
BNA-EN25/16/B1-MG-M1,750-V60x2-MRA-ZVSS 200
Bypass level indicator type BNA-SA1
Pressure: 9.0 bar; Temp.: -10°C...50°C; Density, medium: 1010 kg/m³
Design: PED 2014/68/EU (AD2000)
Classification according to PED 2014/68/EU: Category I, Module A
Fluid group 1
Test pressure: 13 bar
Chamber dimensions: 60.3 x 2 mm stainless steel 1.4571 (316Ti)
Process connection: Flange DIN EN 1092-1 DN 25 PN 16 Form B1
Center distance: 1750 mm
Measuring range: 1750 mm
Chamber end cap: Tube sheet
Chamber end cap: Flange D130
Drain: Plug screw G 1/2"
Float: ZVSS200
Display: BMD-SA, aluminum profile with plastic rollers
Damping element: Damping spring at the bottom with cover
Gasket(s): Sigraflex Universal Pro
Screws: Stainless steel A4-70 (M)
Top projection (T): 100 mm
Bottom projection (U): 200 mm
Distance from lower process connection to end of drain: 260 mm (max.)
Lateral clearance (X): 100 mm (max.)
Nameplate: Laser-engraved aluminum
MG-AVK10/T15-L1,900/M1,750/14
Transducer bypass mounting, reed type BLR-SB
Material: Stainless steel 1.4571 (316Ti)
Housing: Aluminum
Protection class: IP66/IP68
Cable gland M20x1.5 mm
Transducer head: T15.HZ - 2-wire, standard
Output signal: 4-20 mA
Housing orientation: Angled top
100% mark (L1): 0 mm
0% mark: 0 mm
Measuring range: 1750 mm
Pipe length: 1900 mm
Contact pitch: 10 mm
Acceptance test certificate 3.1 according to EN 10204
Certificate type: Acceptance test certificate DIN EN 10204 3.1
Certificate language: English and German
Certificate for: Bypass Standard
Material certificate: Pressure-bearing metallic components in contact with media
with supplier certificate
(Melt analysis)
Pressure and strength test: Hydrostatic internal pressure test